PELABLES

PELABLES

 

BAGGING

                        

BREATHER/INFUSION MESH

                          

RELEASE FILMS

  

PEELPLY

                           

CORES/SORIC

 

ADHESIVES

 

HOZES/PLUGS

 

HARDWARE

 

 

Peel ply is a woven nylon or polyester which is applied between the upper layers of the vacuum system / infusion and the reinforcing fibers (glass / carbon / Kevlar). Peel ply should be placed to the entire surface, without exception, to prevent breather, films or infusion mesh hopelessly adhere to the piece.
Peel ply is crossed by the excess resin and then allows to be removed without too much difficulty.
By applying Peel Ply is avoided any excess of resin on the surface and a textured / rough finish to facilitate bonding or later painted and a professional finish. It is very important to adapt it that without bending or wrinkles, because otherwise will be reflected to the surface. It can be removed at the end of curing or leave it in place until the piece should be mounted or glued with any other.


Display per page
Sort by

PEEL PLY 500 80GR 1 ml

PEEL PLY 500mm 80GR  (LINEAL METER)

3.15 € / unit(s) *
In stock
unit(s)
* Prices include VAT, check delivery rates